From a windows machine use the Remote Desktop Connection program or App found in most versions of Windows except for 'Home“ versions. Mac systems will need the Microsoft Remote Desktop app from the App Store to connect to a PC. Linux systems can use Remmina.

Enter the machines remote address

Enter your credentials

Accept the security certificate

From a Linux machine in the CS244 lab. Use the installed Remmina application.

When the program starts you will need to provide the IP address of the remote computer. This was most likely given to you in an email message from support@cs.ndsu.edu. You will also need the user name and password provided in the same email. You may need to add additional Domain information depending if the computer you are connecting to is on a domain network. For CSCI 125 Fall 2017 do not add any domain information. Adjusting Remmina's Graphics Quality

When done with your session, log off the computer instead of restarting.

If you are having issues connecting to a computer remotely, please see if your error message is below and follow the resolution steps listed.

IMPORTANT

• Repeated failed attempts to a single computer will trigger automatic blocking of the PC you are attempting to for 24 hours. This means that all future attempts from an IP (If at home, any connected to your household router) will continue to fail for 24 hours. If your connection to a lab computer does not work, go ahead and try one or two more machines. DO NOT continue to attempt connections to multiple computers or you can also be blocked for 24 hours. If your computer or IP address has been blocked, we are unable to remove the block, nor can we tell you if it has been blocked. You will need to wait 24 hours to try again.

• If connecting to an ITS managed computer, be sure your NDSU account has been set up for MFA

1) Remote access to the server is not enabled. Enable Remote Desktop on the remote windows computer under Settings –> Remote Desktop. Be sure to enable “Network Level Authentication” under Advanced Settings.

2) The remote computer is turned off or asleep.

3) The remote computer is not available on the network This is the most likely reason for this message to appear.