Adding the Kitchen Lanier Copier/Printer

As of 01/13/2025

• Brand: Rico
• Model: IM3500
• Network ID: prn200.doc-pub.ndsu.edu You may need to enter it's IP instead of FQDN: 10.134.125.24
• Driver: Follow the new instructions provided by ITS in the link below.
  • Skip the part about “On your machine, first launch Make Me Admin to elevate yourself as an administrator and start installing 'Device Software Manager' using your Bison credentials.” It's meaningless for the CS Dept.
  • It also does not give you an opportunity to set the printer name. you have to do that through Printer properties in Settings.
  • Step 2 on setting job codes is also incorrect. use the method below.
  • Install Instructions provided by ITS/Print and Copy Services.

When printer is installed you will need to add your Dept. printing code. (I don't know your code.)

1. From the start menu… Go to Settings –> Devices –> Printers & Scanners.
2. Click on the printer in the list.
3. Click Manage.
4. Click Printing Preferences.
5. Switch to the Basic tab.
6. Choose User Code Setting button found on the top right.
7. Add your printing code in the User Code text box.
8. Click the OK button.

As of 8/25/2022

• Brand: Lanier
• Model: MP4002
• Network ID: prn200.doc-pub.ndsu.nodak.edu
• Driver: Aficio MP 4002/5002 or Gestetner MP 4002 PCL 6 (Current direct link: https://support.ricoh.com/bb/html/dr_ut_e/rc3/model/mp42/mp42.htm)
• Old Instructions have been removed from ITS website.

When printer is installed you will need to add your Dept. printing code.

1. From the start menu… Go to Settings –> Devices –> Printers & Scanners.
2. Click on the printer in the list.
3. Click Manage.
4. Click Printing Preferences.
5. Switch to the Detailed Settings tab.
6. Choose Job Setup from the top left menu.
7. In the bottom right area, add your printing code in the User Code text box.
8. Click the OK button.

Needs Job/Security code (Deb Only):

prn117.DOC-PUB.ndsu.nodak.edu
Lanier LD630C
ID# 1685-163