Differences

This shows you the differences between two versions of the page.

--- helpdocs:kitchen_copier [2025/02/04 19:08] – [Adding the Kitchen Lanier Copier/Printer] localadmin
+++ helpdocs:kitchen_copier [2025/05/28 13:25] (current) – [For Windows 10/11] localadmin
@@ Line 7: / Line 7: @@
   * Network ID: prn200.doc-pub.ndsu.edu <color #ed1c24>You may need to enter it's IP instead of FQDN: 10.134.125.24</color>
   * Driver: Follow the new instructions provided by ITS in the link below.
+  * Some things are wrong or different with the ITS instructions. You may need to do the following:
     * <color #ed1c24>Skip the part about "On your machine, first launch Make Me Admin to elevate yourself as an administrator and start installing 'Device Software Manager' using your Bison credentials." It's meaningless for the CS Dept.</color>
-    * <color #ed1c24>It also may not give you an opportunity to set the printer name. you have to do that through Printer properties in Settings.</color>
+    * <color #ed1c24>It also may not give you an opportunity to set the printer name. Then you have to do that through Printer Properties in Settings.</color>
-    * <color #ed1c24>Step 2 on setting job codes is also incorrect. use the method below.</color>
+    * <color #ed1c24>If Step 2, on setting job codes, is also incorrect. use the method below.</color>
-    * [[https://kb.ndsu.edu/page.php?id=105324|Install Instructions provided by ITS/Print and Copy Services.]]
+  * [[https://kb.ndsu.edu/page.php?id=105324|Install Instructions provided by ITS/Print and Copy Services.]]
 When printer is installed you will need to add your Dept. printing code. (I don't know your code.)
@@ Line 21: / Line 22: @@
   - Add your printing code in the **User Code** text box.
   - Click the **OK** button.
+----
 ==== Old Method ====